Motion , Detection , Upload FTP , Dlink 6620

Overview :

The aim of this simple project is use IP-Camera ( Dlink-6620) to Detect motion in an area under monitoring then record snapshots in a FTP Server.


System Requirement:

IP-Camera , FTP Server , Client PC (optional)



System Considerations and Configurations:

FTP Server

FileZella 0.9.24 Beta under Windows XP
Create Camera user with password (1)
and Create Special Folder For the Camera with the Read and write privilage (2)

(1) (2)

IP Camera Settings

* Configure the Camera FTP client

With the Server IP Add. , usernamer , password , Folder

*Enable motion detection and Configure motion detection window

Adjust the Sernstivity and Percentage to the desired level

Sensitivity:
Sets the measurable difference between two sequential images that would indicate motion.

Percentage:
Sets the amount of motion in the window being monitored that is required to initiate a motion detected alert. If this is set to 100%, this means that motion is detected within the whole window to trigger a snapshot.

Note: Setting a higher sensitivity and a lower percentage will make any motion more easily detected.

* Configure the Application (Scenrio) for Uploading the FTP

From the Tools menu --> Application

Adjust for All time , Event Opration , Select the Motion windown , and Upload

to FTP radio button